T-110 CO2 Sensor Module

Download the Datasheet
Category: ELT Sensor Modules

About the Product

As one of the world’s smallest CO2 sensor modules, the T-110 are intended for residential indoor air-quality monitoring applications. 

The T-110 is a favorite for its temperature independence and long life cycle.

Request More Information
ELT S300
Features Available outputs : PWM, TTL UART, AVO/PWM ALARM
NDIR
Re-calibration function (Weekly period/10 min. period)
Size – 19mm×29.5mm×8.5mm
General Performance Operating Temperature range=> 0 ~ 45℃
Operating Humidity range => 0 ~ 85% RH (Non-condensing)
Storage Temperature => -30℃ ~ 70℃
Measurement

Sensing method => NDIR (Non-dispersive Infrared)

 

Measurementrange=> 0 to 2,000/3,000/5,000/10,000 ppm (Optional)
0 to 2%, 3%, 5%, 10% vol.(Optional)
Accuracy => 0 to 10,000ppm : ±50ppm ±3% measured value(ACDL)
<5% : ± 200ppm± 3% of measured value
<10% : ± 200ppm± 5% of measured value

Response Time (90%) => 3 minutes
Sampling Interval => 5 sec
Electrical Input Power => 5.0V (±1% Regulation)
Power consumption => Normal : 20mA, Max. 200mA
Output connector => 6pin/16pin (55560-0168)
Output Digital=> UART- 38,400BPS, 8bit, No parity, 1 stop bit TTL Level
Analog => PWM (1004ms period, 2ms Start, 2ms Stop)
ALARM => Open Collector type, 1,000 ppm ≤ Alarm ON, 800 ppm ≥ Alarm OFF

Contact Us

1 + 11 =

Your trusted gas detection partner since 1984.

Suite 104, 1610 – 20th Street Didsbury, AB, Canada T0M 0W0

(403) 335 – 9875

(403) 335 – 4818

info@gasdetect.com