ELT CO2 Sensor Modules
CO2 Sensor Module products by ELT and from Airwave Electronics
T-110 CO2 Sensor Module
ELT T-110 Datasheet (requires Adobe PDF Reader)

| Features | Available outputs : PWM, TTL UART, AVO/PWM ALARM NDIR Re-calibration function (Weekly period/10 min. period) Size – 19mm×29.5mm×8.5mm |
||||||||||
| General Performance | Operating Temperature range=> 0 ~ 45℃ Operating Humidity range => 0 ~ 85% RH (Non-condensing) Storage Temperature => -30℃ ~ 70℃ |
||||||||||
| Measurement | Sensing method => NDIR (Non-dispersive Infrared)
Response Time (90%) => 3 minutes |
||||||||||
| Electrical | Input Power => 5.0V (±1% Regulation) Power consumption => Normal : 20mA, Max. 200mA Output connector => 6pin/16pin (55560-0168) |
||||||||||
| Output | Digital=> UART- 38,400BPS, 8bit, No parity, 1 stop bit TTL Level Analog => PWM (1004ms period, 2ms Start, 2ms Stop) ALARM => Open Collector type, 1,000 ppm ≤ Alarm ON, 800 ppm ≥ Alarm OFF |
S-300 CO2 Sensor Module
ELT S-300 Datasheet (requires Adobe PDF Reader)

| Features | Available outputs : AVO/PWM, TTL UART, I2C NDIR Re-calibrationfunction (Monthly period/10 min. period)-Optional Size – 33mm×33mm×13mm |
| General Performance | Operating Temperature range=> 0 ~ 50℃ Operating Humidity range => 0 ~ 95% RH (Non-condensing) StorageTemperature => -30℃ ~ 70℃ |
| Measurement | Sensing method => NDIR (Non-dispersive Infrared) Measurement range => 0 to 2,000/3,000/5,000/10,000ppm/0-2%/0-3%/0-5% (Optional) |
| Electrical | InputPower=>5.0V(±1% Regulation) Power consumption => Normal : 16mA/ Max. 380mA Output connector => 4pin/10pin (2mm Pitch Socket) |
| Output | Digital=> UART- 38,400BPS, 8bit, No parity, 1 stop bit TTL Level Analog => VDC 0.5 ~ 4.5V (linear output) I2C => Slave |
